High temperature test temperature requirements for different fluoroplastics

The high temperature test temperature requirements for different fluoroplastics are as follows (recommended product YASELINE high and low temperature test chamber):

Fluoroplastic: ETFE Temperature: 149±3°C

Fluoroplastic: FEP Temperature: 149±3°C

Fluoroplastic: PFA Temperature: 260 ± 3 ° C

Fluoroplastic: PTFE Temperature: 260 ± 3 ° C

Fluoroplastic: PVDF Temperature: 135±3°C

Note: 1. The above various temperatures are the recommended temperatures for each type of fluoroplastic. Manufacturers can specify different temperature values ​​than the above requirements according to different materials, products and process conditions (such as modification of fluoroplastics).

2. The above temperature is tested based on non-corrosive conditions and no pressure. The high temperature resistance of the fluoroplastic may change under specific conditions. The temperature limit in the specific working conditions should be agreed between the user and the manufacturer, or the manufacturer should correct the test value according to the actual experience. For example, the fluoroplastic is lined by the adhesive, and the high temperature resistance of the adhesive should be considered.

不同氟塑料的高温试验温度要求

Microfiber Paint Roller Brush

This is suitable for brushing semi smooth and smooth surface rollers. Its absorption of paint is very large.
The surface of this product is very soft, its effect is as strong as sponge brush, but it is easier to carry than sponge brush. It covers a small area.
Its bristles are made up of tiny bits of fluff and can be easily painted on rough surfaces.
Product advantages: smooth, overall sense, strong carding uniform, neat, no hair chamfer overlap or gap is too large (0.5-1.5mm)

Roller Brushes,Carpet Roller Brush,Durable Microfiber Roller Sleeves,Microfiber Sleeves

Zhenjiang Yongjiufa brush industry Co. Ltd. , https://www.yongfa-brushs.com

Posted on